I have been working on building a custom Quad Copter with parts ordered from Hobby King.

 

Materials List:

• TURNIGY Plush 25amp Speed Controller (4)
• D2822/14 Brushless Outrunner 1450kv (4)
• Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
• Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware)
• Hobby King Quadcopter Power Distribution Board
• Hobbyking X550 Glass Fiber Quadcopter Frame 550mm

 

Wiring The Remote

The list below is the current way I have the remote wired to the flight controller.

• AIL – CH1
• ELE – CH2
• THR – CH3
• RUD – CH4
• AUX –  CH6

 

Wiring the Quad

 

Remote Configuration

The picture below is how I have the remote configured.